Timbered House Inspection
What is the condition of the half-timbered house?
So that the roof doesn’t fall on your head
Assessment of the stability and load-bearing capacity of the truss
Half-timbered houses must be checked professionally to identify weak points and security risks. Most of the damage is inside the built-in construction wood and is not visible from the outside. In order to detect possible internal damage and rotten areas at an early stage, measurements inside the wood are therefore essential. This is the only way to eliminate weak points in good time and ensure the safety of a half-timbered house.
Drilling resistance measuring devices enable the interior of the wood to be assessed
Measurement methods such as drilling resistance measurement provide information about the internal condition of a piece of wood. This allows cavities and rotten spots to be reliably identified. With drilling resistance measuring devices such as the IML-RESI PowerDrill and the IML-RESI F series, it is therefore possible to properly assess the stability and load-bearing capacity of half-timbered houses.
Frequently asked questions about „Timbered House Inspection“
(+14, 18 Bewertungen)
Loading...The wood inspection drill measures the force of the needle turning through the wood product. For example, when the bit hits any soft decay the force on the graph will drop and if the needle hits a hard, brittle decay the graph will spike. If the bit runs through a cavity area the graph will drop measuring no resistance for the bit. The measurements are then collected on either a wax paper strip (F-Series) or electronically recorded for an instant upload (PD-Series).
(+13, 17 Bewertungen)Loading...With the F-Series drill the measurements are recorded on a wax paper strip. Typically users scan the wax paper strip into their report reinforcing their assessment of the wood. The PD-Series drill records the measurements automatically in digital form and can instantly upload these results to your computer via Bluetooth or USB cable. Software is available for your computer to analyze and organize your collected results.
(+9, 21 Bewertungen)Loading...Our wood inspection systems
for the timbered house inspection
-
IML-RESI MD300The IML-RESI MD300 is a driling instrument working purely mechanically that does not record a measurement curve, neither electronically nor mechanically. The user feels the result and can read the penetration depth on the 300 mm scale. Often an abrupt and fast penetration is perceptible when the instrument detects a rot zone. Even the annual rings of conifers can be noticed.
775,00 €Plus 19% VATplus shippingDelivery Time: ca. 2-3 workdays
-
IML-RESI F-Series
The IML-RESI F series is driven by an usual drill and is very easy to handle The instrument is cordless and therefore ideal for difficult operating conditions. The measurement profile is recorded simultaneously to the drilling depth on wax paper strip.
3.025,00 €Plus 19% VATplus shippingDelivery Time: ca. 2-3 workdays
-
IML-RESI PowerDrill ®
The IML PowerDrill® is equipped with an electronic unit that gives clear support in taking, documenting and evaluating measurements. It can be used wherever reliable and meaningful measurements are required.
6.085,00 €Plus 19% VATplus shippingDelivery Time: ca. 2-3 workdays
We have been cooperating very successfully and quality oriented with IML GmBh for several years. Problems?! There are none, because the team of IML is very friendly and helpful when ordering and in any technical direction to their products. They are up to the smallest detail. Definitely on a level 10 in a rating of 1-10. Thank you very much for the many years of good cooperation.
I previously worked with the IML-RESI B400 for years. This device worked flawlessly, due to the year of manufacture it had a rather Russian design. I am glad to have owned the B400 – so I can enjoy the advantages of years of development for the new PD-400: faster, much lighter, more compact, almost self-explanatory menu and eternally lasting battery! You can tell there’s a lot of attention to pragmatic detail here!
The many years of trustful cooperation in the segment of wood testing systems is of great importance on the part of FA. IML GmbH is characterized by high product quality and product development. In addition, the technical support is traget-oriented (very important for us), which is optimally implemented by the systematic approach of the respective employees. Questions, suggestions and if occurring ‘problems’, are immediately provided with a solution. In short, we feel that we are in “the best of hands”. Many thanks!
Fachartikel zur Fachwerkkontrolle
Feed force measurement – Simply know what nobody sees – Advantage through technology
High accuracy for hard wood and early wood decay The feed force is the force required by the drilling needle to penetrate the wood. Besides the drilling resistance it is the second…
Engineering office Nieke about the IML PowerDrill® for the inspection of timber constructions and timber buildings
Since 2014 we have been using the IML-RESI PowerDrill® to measure drilling resistance in order to assess the condition and safety of wooden buildings and wooden constructions in houses. This enables us…
Drilling Resistance Measurement
Approved procedure, quick results Drilling Resistance Measurement The IML-RESI System is based on the principle of measuring the drilling resistance. A drilling needle is inserted in the wood under constant drive. While…
