Additional posts to this topic

IML-RESI PowerDrill ®

26 results are shown.

When is a test disc worn out?
15. November 2021

When is a test disc worn out?

A test disc is worn out when the needle is assessed with the needle status “Worn out, replace needle!”. Wear marks/indentations are safe indications for a worn out test disc.

Can additional modules also be installed on the unit at a later date?
15. November 2021

Can additional modules also be installed on the unit at a later date?

All additional modules can also be retrofitted to your device. Either at our service centre or conveniently at your home with an activation code generated by us.

Can the information collected from the inspection be exported to other operating systems?
21. September 2021

Can the information collected from the inspection be exported to other operating systems?

Yes, you can take the information from PD/F Tools or WoodInspector and utilize it in your GIS or other related software.

How does the WoodInspector software work for pole inspections?
21. September 2021

How does the WoodInspector software work for pole inspections?

With the WoodInspector- software you will get a direct condition assessment of the wooden pole right after performing the measurements. Here, individually specified rot and cavity limit values of the timber branch to be inspected are included as criteria for…

How can you use the drill for a pole inspection?
21. September 2021

How can you use the drill for a pole inspection?

Many customers use the drill for pole inspections by conducting three drillings on the pole. First to determine the diameter for the WoodInspector software, second drilling into the base of the pole at an angle of about 30 degrees and…

Can you use the PD-Series electronic drill in the rain?
21. September 2021

Can you use the PD-Series electronic drill in the rain?

The standard inspection drills are water resistant, not waterproof. You will want to treat the drill as you would your smart phone of other electronic devices that are water resistant.

Can the drill be used in cold temperatures?
21. September 2021

Can the drill be used in cold temperatures?

Yes, the drill can inspect when it is in freezing weather. However, decay can also freeze and show a higher resistance than above freezing. However, you can still detect decay with the change in the resistance if the decay is…

How many drillings can you get per battery?
21. September 2021

How many drillings can you get per battery?

With the IML-RESI PD-series, you can perform approx. 200 measurements per battery charge (battery: 18 V, 5.0 Ah). With the IML-RESI F series, you can perform approx. 50 measurements per battery charge (battery: 18 V, 4.0 Ah).