How long do the batteries need to be fully charged?
The standard scope of delivery includes 2 batteries (18 V, 5.0 Ah). These can be fully charged in approx. 30 minutes with the quick charger.
31 results are shown.
The standard scope of delivery includes 2 batteries (18 V, 5.0 Ah). These can be fully charged in approx. 30 minutes with the quick charger.
Press the red or black button instead of the navigation button for a longer period of time. If the device does not switch on again, contact the service. Switching on via the navigation button can be activated/deactivated in Control Panel…
Check whether the 45° adapter is correctly mounted and whether the symbol for the safety switch lights up in the display when pressed.
Make sure that the drilling depth preselection is switched off. If the number 2.0 appears on the display, the drilling depth preselection is set to 20mm. To deactivate it, press and hold the red button while the machine is switched…
There is the possibility of data recovery. This restores all data still present on the Resi. Provided they have not yet been overwritten. Control Panel > Data Recovery > YES
It is possible to choose between several drilling needle speeds in the Advanced View, equal to the feed rate System Controls > Drilling Needle Speed > Mode: Advanced The different steps can also be individually assigned different speeds.
The individual feed rates can be assigned individually via the System controls > Feed rate menu. By deleting the individual values, individual feed rates can also be deleted completely from the “Quick selection”.
Your unit synchronises itself with the system time of your computer each time it is connected. The current time set in the computer is always used.
Remove the 45° adapter and detach the front adapter from the unit Now move the feed unit forward !SLOWLY! Guide the telescope by hand to avoid jamming the drilling needle in the telescope. When you reach the front end position,…