Shop
Showing 85–96 of 150 results
-
Exchangeable Drill Chuck
Exchangeable drill chuck for all PD devices.
-
Chuck with Tool Kit
Exchangeable Chuck with Tool Kit.
-
Exchangeable Telescope
Exchangeable telescope with complete needle guide. Only for IML-RESI FSX Serie
-
Exchangeable Telescope
Exchangeable telescope.
-
Tool „Tool Kit“
Tool kit for minor maintenance and repair operations.
-
Tool Kit Front Adapter
Tool kit for the exchange of the measuring sleeve
-
Feed Module (FEED)
Additional recording of the feed curve (compressive force) next to the drilling curve (torsional force). In some cases the feed curve contains a significantly reduced curve or no skirt friction at all acting on the drilling needle. This means that it is considerably easier to detect the difference between healthy and damaged wood. In addition, it is easier to diagnose rot on the feed curve at an early stage.
-
Additional Module WoodInspector
The IML WoodInspector is an additional module for the PD-Tools PRO software package. An automatic assessment of wooden poles or wooden play equipment is performed by the IML WoodInspector.
-
PD-Tools PRO WoodInspector
The IML WoodInspector is an additional module for the PD-Tools PRO Software package. An automatic assessment of wooden poles or wooden play equipment is performed by the IML WoodInspector.
-
Add-On Module NC Needle-Check
Automatic check of drilling needle for presence (breakage) and width (wear) after every measurement. Different wear tolerances selectable at the time of order. The state of the needle (ok/worn) is saved with every measurement.
-
Add-On Module TLT Tilt Sensor
Displays and saves the tilt angle. Additional options like determining two preferential angles with optical and acoustical indicators and blocking function, if the tilt angle is outside the specified tolerance. Optional tilt compensation for drilling depth preselection.
-
Add-On Module RCI
Remote Control Interface (RCI). Interface for configuration, control and data transfer from customer application (no use of PD-Tools/PD-Tools Pro). Data can be transmitted and processed within customer application.
