Additional modules PD Series
Showing all 9 results
-
Memory Enlargement PD
-
Feed Module (FEED)
Additional recording of the feed curve (compressive force) next to the drilling curve (torsional force). In some cases the feed curve contains a significantly reduced curve or no skirt friction at all acting on the drilling needle. This means that it is considerably easier to detect the difference between healthy and damaged wood. In addition, it is easier to diagnose rot on the feed curve at an early stage.
-
Additional Module WoodInspector
The IML WoodInspector is an additional module for the PD-Tools PRO software package. An automatic assessment of wooden poles or wooden play equipment is performed by the IML WoodInspector.
-
PD-Tools PRO WoodInspector
The IML WoodInspector is an additional module for the PD-Tools PRO Software package. An automatic assessment of wooden poles or wooden play equipment is performed by the IML WoodInspector.
-
Add-On Module NC Needle-Check
Automatic check of drilling needle for presence (breakage) and width (wear) after every measurement. Different wear tolerances selectable at the time of order. The state of the needle (ok/worn) is saved with every measurement.
-
Add-On Module TLT Tilt Sensor
Displays and saves the tilt angle. Additional options like determining two preferential angles with optical and acoustical indicators and blocking function, if the tilt angle is outside the specified tolerance. Optional tilt compensation for drilling depth preselection.
-
Add-On Module RCI
Remote Control Interface (RCI). Interface for configuration, control and data transfer from customer application (no use of PD-Tools/PD-Tools Pro). Data can be transmitted and processed within customer application.
-
Add-On Module SCL Scaling Package
-
Add-On Module ACS Access Control
Access Control (ACS). With this add-on, the user can assign virtually all features and settings with a password dialog. Thus changing settings can be avoided.
